Using Your New Walk-In Cooler Or Freezer For The First Time
The importance of keeping your walk-in cooler or freezer running efficiently and safely cannot be overstated. Your walk-in cooler should be running at temperatures ranging from +34 degrees Fahrenheit to +37 degrees Fahrenheit unless you require a different temperature for special applications.
For your freezer unit, the temperatures should range from 0 degrees Fahrenheit to -10 degrees Fahrenheit for any frozen food. Then for ice cream, freezer temperatures should range between -10 degrees Fahrenheit to 15 degrees Fahrenheit.
Before you can store any food products, there are a few key steps you must take to ensure the successful operation of your unit.
Start-Up Operations for a Walk-in Cooler
When you first start up your walk-in cooler, you can expect the following operating sequence to occur:
- The thermostat will call for the refrigerant.
- The liquid line solenoid valve opens, allowing the refrigerant to flow.
- The pressure control then makes the control circuit and the condensing unit operate.
- Once the room thermostat is satisfied, it will cause the liquid line solenoid to close.
- Then, the compressor will pump down and shut off while the unit cooler fan will continue running.
It’s important to avoid setting your walk-in cooler lower than 32 degrees Fahrenheit because damage may occur.
Start-Up Operations for a Walk-In Freezer
When you are going to start your walk-in freezer, you can expect the following operating sequence:
- The thermostat will call for the refrigerant.
- The liquid line solenoid valve then opens and allows the refrigerant to flow.
- The pressure control will cause the control circuit and then condensing unit to operate.
- The fans will be delayed due to the defrost termination and will operate once the coil temperature reaches +20 degrees Fahrenheit. They can cycle two to three times until room temperature stabilizes.
- Once the room thermostat is satisfied, it will cause the liquid line solenoid to close.
- The compressor will then pump down and turn off.
If a qualified professional refrigerant technician installed your walk-in cooler or freezer, all of these operations should cycle without a problem. By taking note of these operations, you can successfully start your walk-in cooler or freezer for the first time and make sure it operates correctly. With a little bit of preparation, you can ensure your food products are kept safe and in optimal condition for years to come!
Interested in a Walk-in Cooler or Freezer? Call Fugh Refrigeration Today!
At Fugh Refrigeration, we offer a wide range of quality walk-in cooler and freezer units to meet your needs! We also offer professional installation services to ensure your unit is installed and working properly. Contact us today to learn more!
Latest posts by Matthew Wynne
(see all)
